all

13 Unbelievable Facts About the Chevy C/K C10 Pickup Trucks You Probably Didn't Know

1. What does C10 mean on trucks?

Q: What does C10 mean on trucks?
A: The "C" in C10 stands for "Conventional" in reference to the truck's two-wheel-drive system, while the "10" refers to the half-ton rating of the truck's payload capacity. This nomenclature was used by Chevrolet to distinguish their line of pickup trucks throughout the 1960s to the 1980s.

C10 Pickup

2. What is a C10 truck worth?

Q: What is a C10 truck worth?
A: The value of a C10 truck can vary greatly depending on its condition, year, and any modifications or restorations that have been made. On average, a well-maintained C10 truck can range anywhere from $15,000 to $50,000. However, fully restored models or rare editions can fetch much higher prices.

3. What years are C10 Chevy trucks?

Q: What years are C10 Chevy trucks?
A: The Chevrolet C10 trucks were produced from 1960 to 1987. The third generation, which is often the most sought after, was produced from 1973 to 1987. These trucks are known for their classic square body design.

Chevy C10

4. What year C10 is the most popular?

Q: What year C10 is the most popular?
A: The 1973-1987 models, known as the "Square Body" generation, are often considered the most popular among enthusiasts. These models are known for their rugged design, reliability, and ease of modification, making them a favorite among restorers and custom builders.

5. What is the most sought after square body Chevy?

Q: What is the most sought after square body Chevy?
A: The 1987 Chevy C10 is often considered the most sought after square body Chevy. This year marked the end of the third generation C/K series, making it a favorite among collectors. It's also the last year Chevy used carburetors before switching to fuel injection, which adds to its appeal for many enthusiasts.

Chevy C10

6. Is a C10 a good truck?

Q: Is a C10 a good truck?
A: Absolutely! The Chevy C10 is renowned for its durability, ease of maintenance, and versatility. Its classic design and powerful performance make it a favorite among truck enthusiasts. Whether for daily use, restoration projects, or just for the sheer joy of owning a piece of automotive history, the C10 is a great truck.

7. What is the best year old Chevy truck?

Q: What is the best year old Chevy truck?
A: While "best" can be subjective depending on personal preferences, many enthusiasts agree that the 1985 Chevy C10 is one of the best vintage Chevy trucks. This model year is known for its durability, classic design, and the introduction of fuel injection, which improved performance and fuel efficiency.

8. What is the rarest Chevy?

Q: What is the rarest Chevy?
A: The 1969 Chevrolet C10 with a 396 big-block engine is considered one of the rarest Chevy trucks. This model was only produced for one year and is highly sought after by collectors. It's a beast of a truck that can give even a Corvette a run for its money!

Slammed C10

9. What year did Chevy stop making the square body?

Q: What year did Chevy stop making the square body?
A: Chevrolet stopped making the square body design in 1987. This marked the end of the third generation of C/K trucks, making way for the more aerodynamic fourth generation. However, the square body design remains a classic and is still highly sought after by collectors and enthusiasts.

10. Did the C10 come with forced induction?

Q: Did the C10 come with forced induction?
A: No, the Chevy C10 did not come with forced induction from the factory. However, many enthusiasts have added aftermarket turbochargers or superchargers to their C10s to increase performance.

11. Can you fit a LS9 engine in a C10?

Q: Can you fit a LS9 engine in a C10?
A: Yes, you can fit a LS9 engine in a C10 with some modifications. This is a popular swap among enthusiasts looking to give their C10 a serious boost in power. Just imagine a C10 with the heart of a ZR1!

Murdered Out C10

12. What's the craziest modification you've seen on a C10?

Q: What's the craziest modification you've seenon a C10?
A: One of the craziest modifications I've seen on a C10 was a complete engine swap with a LS9 from a Corvette ZR1, coupled with a forced induction system. This beast of a truck had the heart of a supercar and could go toe-to-toe with some of the fastest cars on the road!

13. Can a C10 be turned into a race truck?

Q: Can a C10 be turned into a race truck?
A: Absolutely! With the right modifications, a C10 can be turned into a formidable race truck. Upgrades like a powerful LS9 engine, a forced induction system, and a performance cooling system can transform a C10 into a true speed demon. Just remember, with great power comes great responsibility!

There you have it, folks! Thirteen fascinating facts about the Chevy C10 that you might not have known. Whether you're a seasoned gearhead or a newbie to the world of classic trucks, there's always something new to learn about these iconic vehicles. So, buckle up, keep your eyes on the road, and enjoy the ride!

  • High Flow C6 ZR1 Corvette Water Inlet Adapters-XtremeCFM-XCFM-10102
    High Flow C6 ZR1 Corvette Water Inlet Adapters
    $59.95
    $59.95

    3 total reviews

  • C6 Corvette ZR1 -12AN Water Inlets-XtremeCFM-Natural Billet-XCFM-10094
    C6 Corvette ZR1 -12AN Water Inlets
    From $149.95
    From $149.95

    5 total reviews

  • C&R Racing Chevrolet Corvette ZR1 (C6) LS9 2009-2013 Intercooler Bricks
    Sold out
    C&R Racing Corvette ZR1 (C6) Intercooler Bricks - UC-SPK007B
    $1,668.95
    $1,668.95

    1 total reviews

  • ZPE's MKII Hub For LSA/LS9/LT4 Blower Pulley Mounting
    GripTec ZPE MKII Hub (LSA/LS9/LT4/LT5) Blower Pulleys
    $62.95
    $62.95
  • LSX Supercharger Intercooler Lid-XtremeCFM-
    Sale
    LSX Supercharger Intercooler Lid
    From $1,074.95
    From $1,074.95 $1,345.00

    1 total reviews

  • Nick Williams 103mm Adjustable Rotating Throttle Body Adapter-XtremeCFM-103mm Straight (Single Gasket)-XCFM-10404
    Nick Williams 103mm Adjustable Rotating Throttle Body Adapter
    $79.95
    $79.95

    1 total reviews

  • 2.50 Inch GripTec ZPE Hub LSA Blower Pulley.
    GripTec LSA / ZL1 Blower Pulley (For ZPE Hub)
    $164.95
    $164.95

    1 total reviews

  • C6 ZR1 Corvette Corner Trunk Water/Ice Tank Kit-XtremeCFM-XCFM-10093
    C6 ZR1 Corvette Corner Trunk Water/Ice Tank Kit
    $1,699.95
    $1,699.95

    2 total reviews

  • Billet Hose Menders Black Anodized-XtremeCFM-0.75" ID Hose Mender-XCFM-10000
    Billet Hose Menders Black Anodized
    From $9.95
    From $9.95

    1 total reviews

  • Eaton Supercharger Isolator Coupling (LSA/LS9)-Eaton-ETN-ISO-361506
    Eaton Supercharger Isolator Coupling (LSA/LS9)
    $71.95
    $71.95

Leave a comment

Please note, comments need to be approved before they are published.